Day: April 24, 2021

PennGrade 1® V-Twin 4-Stroke Motorcycle Oil SAE 20W-50

PENNGRADE 1® V-TWIN 4-STROKE MOTORCYCLE OIL SAE 20W-50

PennGrade 1® V-Twin 4-Stroke Motorcycle Oil SAE 20W-50 is formulated with mineral based premium grade base oils and superior additive chemistry specifically designed with V-Twin domestic and imported motorcycle engine technology/lubrication needs in mind. It provides increased levels of ‘zinc’ (zinc dialkyldithiophosphate) for exceptional anti-wear/anti-scuffing protection. Detergents, dispersants and anti-oxidants offer protection from thermal and/or oxidative oil breakdown that can lead to varnish and deposit formation. Anti-foam agents reduce oil foaming and air entrainment under high-output, high revving conditions. It meets JASO MA frictional performance requirements for wet clutches and is suitable for use in applications calling for one lubricant for the engine, transmission/wet clutch and primary chain systems (if applicable).

SAE 20W-50

Viscosity profiles meet the full requirements for protection and performance. Always consult your owner’s manual for proper oil viscosity and quality selection guidance.

 

PACKAGING DETAILS

Available in a wide range of packaging including:

Part Number Packaging
71576 12 Quart Case

TYPICAL APPLICATIONS

PennGrade 1® V-Twin 4-Stroke Motorcycle Oil SAE 20W-50 is a good multi-viscosity choice for
use in V-Twin engines such as those commonly found in Harley-Davidson® motorcycles where an
SAE 20W-50, API Service SJ, CF or CH-4 quality motor oil is specified. Also suitable for use in S&S®,
RevTech® and other 4-stroke domestic and imported motorcycles where an SAE 20W-50 viscosity,
API SJ, SH, SG, CH-4 or CF quality oil is specified. Always consult your owner’s manual for proper oil
viscosity and quality selection.

                                   

PennGrade 1® V-Twin 4-Stroke Motorcycle Oil SAE 10W-40

PENNGRADE 1® V-TWIN 4-STROKE MOTORCYCLE OIL SAE 10W-40

Blended with premium base oils, select synthetic components and superior additive chemistry, PennGrade 1® V-Twin 4-Stroke Motorcycle Oil SAE 10W-40 is specifically formulated to offer the ultimate in quality, performance and protection for motorcycles. Unlike most other multi-viscosity motorcycle oils, the very unique viscosity modifier used in our PennGrade 1® oil is not based upon conventional polymers which can shear significantly with use and cause loss of oil viscosity. This viscosity modifier imparts exceptional High Temperature High Shear viscosity protection to our PennGrade 1® V-Twin 4-Stroke Motorcycle Oil SAE 10W-40 that is so critical for protection of high speed, high revving motorcycle engines. Further, in applications where the same oil is used for lubrication of both the engine and transmission, the excellent shear stability of this motorcycle oil offers a distinctive operational advantage over other less shear-stable oils. Increased levels of ‘zinc’ (zinc dialkyldithiophosphate) in PennGrade 1® V-Twin 4-Stroke Motorcycle Oil SAE 10W-40 provide exceptional anti-wear/anti-scuffing protection. Detergents, dispersants and anti-oxidants offer protection from thermal and/or oxidative oil breakdown that can lead to varnish and deposit formation. Anti-foam agents reduce oil foaming and air entrainment under high-speed and/or high-RPM operation

SAE 10W-40

Viscosity profiles meet the full requirements for protection and performance. Always consult your owner’s manual for proper oil viscosity and quality selection guidance.

 

PACKAGING DETAILS

Available in a wide range of packaging including:

Part Number Packaging
71566 12 Quart Case

TYPICAL APPLICAITONS

Suitable for use in Honda®, Kawasaki®, Suzuki®, Yamaha® and other 4-stroke motorcycles where
an API SJ, SH or SG quality oil is specified. Consult your owner’s manual for proper oil viscosity
and quality selection. May also be used in ATV’s, golf carts, 4-wheelers and other 4-stroke engine
applications.

                                 

AutoTrans G-3™ ATF Conventiona

AUTOTRANS G-3™ ATF CONVENTIONAL

AutoTrans G-3™ is an automatic transmission fluid (ATF) that meets on-highway performance requirements for Dexron® III H, Allison Type C-4 and Ford Mercon®. It offers excellent corrosion resistance to all types of metals used in transmissions and hydraulic systems, plus provides superior friction retention and thermal and oxidation stability. AutoTrans G-3™ can be used in a broad variety of multi-vehicle applications found in on- and off-highway service as well as marine and industrial applications.

PACKAGING DETAILS

Available in a wide range of packaging including:

Part Number Packaging
54501 Bulk
54502 55 Gallon Drum
54503 330 Gallon Tote
54505 6 Gallon Bag-in-a-box
54506 12 Quart Case
54508 5 Gallon Plastic Pail
54509 5 Gallon Metal Pail

TYPICAL APPLICATIONS

Transmissions requiring:

  • Dexron® III H
  • Dexron® III G
  • Dexron® II D
  • Allison C-4
  • Allison TES-389B
  • Domestic and imported passenger cars and light trucks
  • GMC
  • Ford Mercon®
  • Type A Suffix A (TASA)
  • Mercedes Benz in North America
  • Voith
  • Volvo 37325

NOTE: D-A AutoTrans G-3 does NOT meet Dexron VI,
Mercon LV, Mercon SP or Mercon V requirements.

NOTE: ATF recommendations may vary between models from a manufacturer.
Please consult the owners manual for the correct fluid recommendations.

Dexron is a trademark of General Motors Inc.
Mercon is a trademark of the Ford Motor Company.

For full product details, please click on the provided PDS sheet.

                                                              

AUTOTRANS SUPER LV™ FULL SYNTHETIC

AUTOTRANS SUPER LV™ FULL SYNTHETIC

AutoTrans Super LV™ is a low viscosity, fully synthetic, automatic transmission fluid that supports performance requirements of today’s newer automatic transmissions, including General Motors, Honda, Hyundai, Ford, Kia, Mitsubishi, Nissan, Saab, Toyota, Volkswagen and others. AutoTrans Super LV™ is suitable for severe service applications (up to 50,000 miles) and for extended drain intervals in normal service applications (up to 100,000 miles). It offers excellent corrosion resistance to all types of metals used in transmissions, plus provides superior friction retention and thermal and oxidation stability. AutoTrans Super LV™ can be used in a broad variety of multi-vehicle applications found in on- and off-highway service as well as marine and industrial applications

 

PACKAGING DETAILS

Available in a wide range of packaging including:

Part Number Packaging
54581 Bulk
54582 55 Gallon Drum
54583 330 Gallon Tote
54585 6 Gallon Bag-in-a-box
54586 12 Quart Case

TYPICAL APPLICATIONS

  • Aisin Warner AW-1
  • Dexron VI
  • Ford Mercon LV
  • Ford Mercon SPGM
  • Honda DW-1
  • Hyundai/Kia NWS-9638
  • Hyundai/Kia SP-IV
  • Hyundai/Kia SPH-IV
  • Hyundai/Kia SP-IVRR
  • JASO 1-A-LV
  • JWS 3324
  • Kia NWS-9638
  • Mitsubishi ATF J-2
  • Mitsubishi SP-IV
  • Nissan Matic-S
  • Saab 93 165 147
  • Toyota WS (JWS 3324)
  • Volvo AT102 (P/N 97342)
  • Volvo 97342
  • VW G-055-540

NOTE: ATF recommendations may vary between models from a manufacturer. Please consult the owners manual for the correct fluid recommendations.
Dexron is a trademark of General Motors Inc.
Mercon is a trademark of the Ford Motor Company.

For full product details, please click on the provided PDS sheet.

                                                              

AutoTrans Super Plus™ Full Synthetic

AUTOTRANS SUPER PLUS™ FULL SYNTHETIC

AutoTrans Super Plus™ is a fully synthetic high viscosity automatic transmission fluid that supports the performance requirements in a vast majority of today’s automatic transmissions, including Allison, BMW, Honda, Ford, Mercedes Benz, Mitsubishi, Nissan, Toyota, Volkswagen, Voith, Volvo, ZF, and many others. AutoTrans Super Plus™ is suitable for severe service applications (up to 50,000 miles) and for extended drain intervals in normal service applications (up to 100,000 miles). It offers excellent corrosion resistance to all types of metals used in transmissions and hydraulic systems, plus provides superior friction retention and thermal and oxidation stability. AutoTrans Super Plus™ can be used in a broad variety of multi-vehicle applications found in on- and off- highway service as well as marine and industrial applications.

 

PACKAGING DETAILS

Available in a wide range of packaging including:

Part Number Packaging
54561 Bulk
54562 55 Gallon Drum
54563 330 Gallon Tote
54565 6 Gallon Bag-in-a-box
54566 12 Quart Case
54568 5 Gallon Plastic Pail
54569 5 Gallon Metal Pail

TYPICAL APPLICATIONS

Supports the performance requirements of:

  • Aisin Warner AW-1
  • Aisin Warner JWS3309
  • Allison C-4
  • Audi/VW TL 052 162
  • Audi/VW TL 052 990
  • Audi/VW TL 055 025-A
  • Audi/VW Porsche
    000.043.204.63
    000.043.205.28
  • BMW 83 22 0 026 922
  • BMW 83 22 9 407 807
  • BMW MINI 83 22 7 542 290
  • Daihatsu Ammix D-III ATF
  • FCA ATF+4
  • FCA MOPAR AS68 / 69RC
  • FCA Chrysler MS-1872
  • FCA Chrysler MS-5931
  • FCA Chrysler MS-108388
  • Ford WSS-M2C924-A
  • Ford Merc V
  • Ford FNR5
  • Ford WSS-M2C138
  • Ford WSS-M2C922
  • Ford XL-12
  • Ford WSS-M2C195-A
  • GM Auto Trak II
  • GM IID, GM IIIF, GM IIIG
  • GM IIIH, GM III
  • GM T-IV Transmission Fluid
  • GM ATF Saturn T-IV
  • GM AW-1 Transmission Fluid
  • GM TASA
  • GM Power Steering Fluid
  • GM 9985010
  • GM 9985835
  • Honda ATF-Z1
  • Hyundai/KIA Red-1
  • Hyundai/KIA JWS 3314
  • Hyundai/KIA JWS 3317
  • Hyundai/KIA SP-II
  • Hyundai/KIA SP-III
  • Hyundai/KIA PSF-3
  • Jaguar WSS-M2C922-A1
  • JASO 1-A
  • Jatco Texaco 402
  • Jatco 3100 PL085
  • MAN 339-V-1
  • MAN 339-Z-1
  • MAN 339F
  • Mazda M-III
  • Mazda M-V
  • Mercedes Benz 236.1
  • Mercedes Benz 236.10
  • Mercedes Benz 236.11
  • Mercedes Benz 236.2
  • Mercedes Benz 236.3
  • Mercedes Benz 236.5
  • Mercedes Benz 236.6
  • Mercedes Benz 236.7
  • Mercedes Benz 236.81
  • Mercedes Benz 236.9
  • Mercedes Benz 236.91
  • Mercedes Benz GL-450
  • Mitsubishi SP-II
  • Mitsubishi SP-III
  • Mitsubishi Diamond SP-II
  • Mitsubishi Dia Queen
    ATF J2
  • Mitsubishi PS Fluid
  • Nissan Matic C
  • Nissan Matic D
  • Nissan Matic J
  • Nissan Matic K
  • Nissan PSF-II
  • North American OEM
  • High Viscosity ATF
  • PSA B71 2340
  • Renault DP-0
  • Saab 93165147
  • Saab Power Steering
  • Fluid 2634
  • Subaru ATF
  • Subaru ATF HP
  • Subaru Power Steering Fluid
  • Suzuki 3314
  • Suzuki 3317
  • Toyota T
  • Toyota T-1, T-II & T-III
  • Toyota T-IV
  • Toyota PSF Type EH
  • Voith H55.6335
  • Volvo 1161621 & 1161521
  • Volvo 1161640 & 1161540
  • Volvo 31256774
  • Volvo P/N 97340
  • Volvo AT 101 (P/N 97341)
  • ZF LifeGuard Fluid 5
  • ZF TE-ML 03D
  • ZF TE-ML 04D
  • ZF TE-ML 05L
  • ZF TE-ML 09
  • ZF TE-ML 11 (3 and 4 speeds)
  • ZF TE-ML 14A
  • ZF TE-ML 16L
  • ZF TE-ML 17C
  • ZF TE-ML 21L

For full product details, please click on the provided PDS sheet.

                                                              

SynSure2™ SAE 50

SYNSURE 2™ SAE 50

revvant SynSure 2™ SAE 50 is an SAE 50 heavy-duty manual transmission lubricant containing all synthetic components to extend lubricant service life and transmission drain intervals. Superior lubricating and frictional characteristics improve fuel mileage and give better operating performance when used in manual transmissions. Provides excellent performance over a wide temperature range including sub-zero service, promoting smoother, easier shifting. The additive package provides corrosion protection and is safe for bronze, copper and steel components.

SAE 50

Viscosity profiles meet the full requirements for protection and performance. Always consult your owner’s manual for proper oil viscosity and quality selection guidance.

 

PACKAGING DETAILS

Available in a wide range of packaging including:

Part Number Packaging
14601 Bulk
14602LB 400 Lb Drum
14603 330 Gallon Tote
14606LB 120 Lb Quarter Drum
14608LB 35 Lb Plastic Pail

TYPICAL APPLICATIONS

Heavy duty manual transmissions where extended service intervals are required.
On-highway commercial light and heavy duty trucking, buses and vans.
Off-highway equipment including: construction, mining and agriculture.
Use as a companion with D-A SynSure SAE 75W-90 and SAE 80W-140 in rear axles for maximum component life, service efficiently, and fuel economy improvement.

For full product details, please click on the provided PDS sheet.

                                                              

About US

It takes a combined effort to produce and deliver products that make heavy-duty equipment last longer. At The Revvant Lubricant Company, the success of our team-approach shows, not only in our products and services, but in the feedback we receive from our customers.

  • +1 (434)-515-2557

  • revvant@revvant.com

  • Stafford TX

  • Mo-Fri: 8am - 6pm
    Sat: 10am - 4pm
    Sun: of